NEW INCLUDED OPTIONS - SUMMER SIZZLE PRICING AND THESE FREE UPGRADES!

• FREE SWAY BAR
• FREE DROP SPINDLES
• FREE FREIGHT

Application: 28-31 Model "A" Ford Car and Pick Ups

Considered the highest quality hot rod IFS on the market, this weld in kit offers modern handling, great looks and the lowered stance you're looking for. Total Cost Involved's Custom rear steer IFS unit has been engineered to remove the dreaded bump steer while still offering a large amount of ride height adjustment. Proper front end alignment (caster and camber) is made simple with adjustable stainless eccentrics. All TCI products are 100% made in the USA!

Every Base Custom IFS Features: 

• Laser Cut and TIG Welded "In House" Custom Crossmember
• 1" Upper, 1 1/8" Lower Tubular A-arms
  
• Loaded Aluminum Hubs w/Bearings/Seals
  
• NEW Manual Rack & Pinion
  
• 11" GM Disc Brakes w/Loaded Large Calipers
  
• Adjustable Aluminum "Coil Over" Shocks With 350 # Black Painted Springs,
  
• Hardware and Instructions.
  
• 5x 4.5" Ford Bolt Pattern Standard.

Powder coating, polishing and many hardware options available below!

NEW INCLUDED OPTIONS - SUMMER SIZZLE PRICING AND THESE FREE UPGRADES!

• FREE SWAY BAR
• FREE DROP SPINDLES
• FREE FREIGHT

Application: 32 "Deuce" Ford

Considered the highest quality hot rod IFS on the market, this weld in kit offers modern handling, great looks and the lowered stance you're looking for. Total Cost Involved's Custom rear steer IFS unit has been engineered to remove the dreaded bump steer while still offering a large amount of ride height adjustment. Proper front end alignment (caster and camber) is made simple with adjustable stainless eccentrics. All TCI products are 100% made in the USA!

Every Base Custom IFS Features: 

• Laser Cut and TIG Welded "In House" Custom Crossmember
• 1" Upper, 1 1/8" Lower Tubular A-arms
  
• Loaded Aluminum Hubs w/Bearings/Seals
  
• NEW Manual Rack & Pinion
  
• 11" GM Disc Brakes w/Loaded Large Calipers
  
• Adjustable Aluminum "Coil Over" Shocks With 350 # Black Painted Springs,
  
• Hardware and Instructions.
  
• 5x 4.5" Ford Bolt Pattern Standard.

Powder coating, polishing and many hardware options available below!

NEW INCLUDED OPTIONS - SUMMER SIZZLE PRICING AND THESE FREE UPGRADES!

• FREE SWAY BAR
• FREE DROP SPINDLES
• FREE FREIGHT

Application: 33-34 Ford Cars and Pick Ups

Considered the highest quality hot rod IFS on the market, this weld in kit offers modern handling, great looks and the lowered stance you're looking for. Total Cost Involved's rear steer Custom IFS unit has been engineered to remove the dreaded bump steer while still offering a large amount of ride height adjustment. Proper front end alignment (caster and camber) is made simple with adjustable stainless eccentrics. All TCI products are 100% made in the USA!

Every Base Custom IFS Features: 

• Laser Cut and TIG Welded "In House" Custom Crossmember
• 1" Upper, 1 1/8" Lower Tubular A-arms
  
• Loaded Aluminum Hubs w/Bearings/Seals
  
• NEW Manual Rack & Pinion
  
• 11" GM Disc Brakes w/Loaded Large Calipers
  
• Adjustable Aluminum "Coil Over" Shocks With 350 # Black Painted Springs,
  
• Hardware and Instructions.
  
• 5x 4.5" Ford Bolt Pattern Standard.

Powder coating, polishing and many hardware options available below!

NEW INCLUDED OPTIONS - SUMMER SIZZLE PRICING AND THESE FREE UPGRADES!

• FREE SWAY BAR
• FREE DROP SPINDLES
• FREE FREIGHT

Application:  35-40 Ford Cars and Trucks

Considered the highest quality hot rod IFS on the market, this weld in kit offers modern handling, great looks and the lowered stance you're looking for. Total Cost Involved's Custom front steer IFS unit has been engineered to remove the dreaded bump steer while still offering a large amount of ride height adjustment. Proper front end alignment (caster and camber) is made simple with adjustable stainless eccentrics. All TCI products are 100% made in the USA!

Every Base Custom IFS Features: 

• Laser Cut and TIG Welded "In House" Custom Crossmember
• 1" Upper, 1 1/8" Lower Tubular A-arms
  
• Loaded Aluminum Hubs w/Bearings/Seals
  
• NEW Manual Rack & Pinion
  
• 11" GM Disc Brakes w/Loaded Large Calipers
  
• Adjustable Aluminum "Coil Over" Shocks With 350 # Black Painted Springs,
  
• Hardware and Instructions.
  
• 5x 4.5" Ford Bolt Pattern Standard.

Powder coating, polishing and many hardware options available below!

NEW INCLUDED OPTIONS - SUMMER SIZZLE PRICING AND THESE FREE UPGRADES!

• FREE SWAY BAR
• FREE DROP SPINDLES
• FREE FREIGHT

Application:  28-36 Cheverolet

Considered the highest quality hot rod IFS on the market, this weld in kit offers modern handling, great looks and the lowered stance you're looking for. Total Cost Involved's Custom rear steer IFS unit has been engineered to remove the dreaded bump steer while still offering a large amount of ride height adjustment. Proper front end alignment (caster and camber) is made simple with adjustable stainless eccentrics. All TCI products are 100% made in the USA!

Every Base Custom IFS Features: 

• Laser Cut and TIG Welded "In House" Custom Crossmember
• 1" Upper, 1 1/8" Lower Tubular A-arms
  
• Loaded Aluminum Hubs w/Bearings/Seals
  
• NEW Manual Rack & Pinion
  
• 11" GM Disc Brakes w/Loaded Large Calipers
  
• Adjustable Aluminum "Coil Over" Shocks With 350 # Black Painted Springs,
  
• Hardware and Instructions.
  
• 5x 4.5" Ford Bolt Pattern Standard.

Powder coating, polishing and many hardware options available below!

NEW INCLUDED OPTIONS!

SUMMER SIZZLE PRICING AND THESE FREE UPGRADES!

• FREE 2" DROP SPINDLES
• FREE SWAY BAR
• FREE STEEL INNER FENDER PANELS
• FREE POWER RACK UPGRADE
  
• FREE SHIPPING

PURCHASE A FRONT AND REAR KIT AND RECEIVE FREE SHIPPING ON BOTH!

Why buy a Mustang II IFS? CLICK HERE!

SCROLL DOWN! Powder coating, polishing and many hardware options available below

NEW INCLUDED OPTIONS - SUMMER SIZZLE PRICING AND THESE FREE UPGRADES!

• FREE SWAY BAR
  
• DROP SPINDLES
  
• FREE ALUMINUM INNER FENDER PANELS
  
• FREE POWER RACK UPGRADE
  
• FREE SHIPPING

BUY A FRONT AND REAR KIT AND RECEIVE FREE SHIPPING ON BOTH!

THIS IS TCI'S NEW PRO TOURING IFS!

Applicaton: 62-67 Chevy II and Nova

TCI now offers a “no compromise” pro touring front end that will not break the bank. This is a completely new design with the best possible handling characteristics available.  It starts with a Narrowed Tubular Rail design, redesigned adjustable (threaded heims) down bars and completely new Inner Panels to allow the widest wheel and tire package possible. The aggressive camber gain is very well suited to those who desire their Nova to take on corning tasks with the best of the best. Anti-dive is also aggressive. This will keep your tires flat on the ground when mashing the brake pedal. The engine mounts have been completely redesigned to gain a little room for your steering shaft. Ground clearance was increased while keeping ride height and the center of gravity low. Best of all, this is a fully bolt in front clip. TCI supplies new light weight aluminum inner panels for the fenders to mount to, hinge/hood supports, engine brackets, and core support mounts. All of your existing components bolt right back on. Improved engine mounts are designed to accommodate BBC, SBC as well as the LS-1. 2" drop spindles come standard which may be swapped out for stock height spindles.

Every base Custom IFS features:

• Narrowed Pro Touring Clip
  
• 1" Upper and 1 1/8" Lower Tubular Steel A-Arms
  
• Adjustable Firewall to Clip "Down Bars"
  
• New Manual Rack & Pinion Steering Rack
  
• 11" Drilled and Slotted GM Disc Brakes CPP Large Calipers!
  
• Adjustable Aluminum Coil Over Shocks with 350# Black Painted Springs
• Inner Fender Aluminum Sheet Metal
  
• Hardware and Instructions
  
• 5x 4.75" Chevy Bolt Pattern Standard.
  

The main photo includes the Show Polish/chrome option.

Powder coating, polishing and many hardware options available below.

-NEW INCLUDED OPTIONS

-SUMMER SIZZLE PRICING  

-AND THESE FAB QUEST ONLY FREE UPGRADES!

• FREE SWAY BAR,
  
• FREE 2" DROP SPINDLES 
• FREE SUB FRAME CONNECTORS
  
• FREE POWER RACK UPGRADE

BUY A FRONT AND REAR KIT AND RECEIVE FREE FREIGHT ON BOTH!

Application: 68-72 Chevy Nova

This high performance clip is constructed out of superior strength DOM steel tubing. It is 120 lbs lighter than the stock clip! The double cradle mandrel bent design will elevate your handling to near race car specs. Each fully "bolt in" clip includes welded in core support brackets, body mounts and engine pads capable of locating a SBC, BBC or LS-1. Multi position trans mount (C notched for max exhaust clearance), 2" drop A-arms standard.

Total Cost Involved's Custom IFS clip has been engineered with an aggressive camber rate while still offering a large amount of ride height adjustment so you can achieve the stance your looking for, keep the tires flat while cornering and still maintain proper front end alignment.

• Mandrel Bent & TIG Welded Narrowed Pro Touring Clip
  
• 1" Upper and 1 1/8" Lower Tubular Steel Control Arms With Urethane Bushings Installed
  
• New Manual Rack
  
• 11" Drilled and Slotted GM Disc Brakes w/Large CPP Calipers!
• Adjustable "All American" Aluminum Coil Over Shocks w/350# Black Springs
  
• All Hardware
  
• Detailed Instructions w/Tech Support! 

5x 4.75" Chevy bolt pattern standard. The main photo includes the Show Polish/chrome option.

This item ships as a 377 lbs. pallet by way of Daylite Freight. CALL FOR QUOTE! Commercial address require for delivery.

Please see below for all available options.

-NEW INCLUDED OPTIONS

-SUMMER SIZZLE PRICING  

-FAB QUEST ONLY FREE UPGRADES!

• FREE SWAY BAR
  
• FREE DROP SPINDLES
  
• FREE SUB FRAME CONNECTORS
  
• FREE TRANSMISSION CROSS MEMEBER
  
• FREE POWER RACK UPGRADE
  

Application: 67-69 Camaro and Firebird Coupes and Convertibles

This high performance clip is constructed out of superior strength DOM steel tubing. It is 120 lbs lighter than the stock clip! The double cradle mandrel bent design will elevate your handling to near race car specs. Each fully "bolt in" clip includes welded in core support brackets, body mounts and engine pads capable of locating a SBC, BBC or LS-1. Multi position trans mount (C notched for max exhaust clearance), 2" drop A-arms standard.

Total Cost Involved's Custom IFS clip has been engineered with an aggressive camber rate while still offering a large amount of ride height adjustment so you can achieve the stance your looking for, keep the tires flat while cornering and still maintain proper front end alignment.

Every Custom IFS Includes:

• Mandrel Bent TIG Welded Clip
  
• 1" Upper and 1 1/8" Lower Tubular Steel Control Arms With Urethane Bushings Installed
  
• New Manual Rack
  
• 11" Drilled and Slotted GM Disc Brakes w/Large CPP Calipers!
• Adjustable "All American" Aluminum Coil Over Shocks w/350# Black Springs
  
• All Hardware
  
• Detailed Instructions w/Tech Support! 

5x 4.75" Chevy bolt pattern standard. The main photo includes the Show Polish/chrome option.

This item ships as a 377 lbs. pallet by way of Daylite Freight. Commercial address require for delivery. You can checkout without paying for shipping now but please CAll FOR A FREIGHT QUOTE! We will then make a 2nd charge for freight only.